Nuts, Hexes & Nut Tools
12 product(s) found for "Nuts, Hexes & Nut Tools"
DMM Alloy Offset set size 7-11
The Offsets were originally designed by Hugh Banner, the climbing gear maestro who founded HB Climbing Equipment. Hugh was a real character and an extremely talented climber. He made numerous impressive first ascents during his lifetime, including classic test pieces such as The Mangler (E3 6a) on Helsby...
DMM Brass I.M.P Nut
When the going turns tricky and the only cracks you can find are too narrow for conventional nuts, its time to pull out the micro wires. Its always better to have something, however small, between you and the ground. IMP stands for Immaculate Marginal Protection a neat little acronym, but one which fits...
DMM Brass Offsets Nut
Think of your rack as a box of magical tricks designed to help you tame even the trickiest of climbs. When the going gets tough Brass Offsets are one of the best tricks you can try. Imagine the situation: high on a test piece route you grind to a halt, miles out from the last decent runner. Its time...
You might be thinking that a nut key is just a nut key, plain and simple its just a piece of metal that dislodges jammed nuts? What else could anybody do to improve that? Quite a lot it seems. The more we got into the design process, the more we realised how much we could improve upon the standard designs....
DMM Torque set size 1-4
One of the most versatile piece of protection. Torque Nuts can be used as a wide wedge, their biggest advantage is based on the camming principale of the hexes. DMM developped a piece of passive protection kit that is immensely strong yet very light. Rated at 14kN this equates to holding approx a 1.4...
DMM Wallnuts set size 1-11
Wallnuts are a long established favourite across the world. This classic wired nut has a carefully designed shape that gives you the best possible chance of getting a good solid placement every time. Classics Shaped alloy nuts in wire One side is curvy and other is offset. 11 sizes Lighter extruded sizes...
GRANDWALL Nut Tool
The GrandWall nut tool is designed for recovering your stuck protection. Made of stainless steel. Built-in wire clip carabiner for quick racking. Length: 205mm; Weight: 49g Made in Taiwan
GRANDWALL Wedgemount Nut Set
The Wedgemount nuts are made of 6061-T6 aluminum alloy for maximum light weight and strength and they have a galvanized steel cable for resistance to corrosion. They feature colour-coded anodization and numbering for easy visual identification. The Wedgemount nuts have a transverse tapered shape that...
KAILAS Emery Nuts
Emery Nuts is classic wedge-shaped protection devices, clamp the rock crack and hole tightly during climbing to provide protection. All the four sides of each nut have different curved surfaces and slopes so that it can be applied flexibly to the cracks of different width. One side is curvy and other...
KAILAS Nuts Tool
With the long, thin bar, it can be handled more easily inside the crack. The unique designs and groovy grip facilitate the operation of removing nuts and cams. The small grooves at the head make it more stable when aiming and pushing on nuts. It can be also used to clean dirt cracks or as a hex wrench...
WILD COUNTRY Rock Wire Anodi..
The rock with its curved sides is a Wild Country original and revolutionised how we protect routes. Still the backbone of any good rack, the current incarnation is considerably more advanced than its predecessor and significantly lighter as well. Keeping the original groundbreaking curve, rocks now come...
WILD COUNTRY Superlight Offs..
Less is more. Subtle, superlight and secure, Superlight Offset Rocks are by far the lightest passive pro per size in the world. Simple, yet incredibly effective, they combine the proven curve of Rocks with a radical side taper that adds a new dimension to protection. Intuitive and easy to place, theyre...